Our Products
Fuel Transport Tanks
As Harsan Tanker, we manufacture our Fuel Transport Tanks with a cylindrical cross-section to create the most durable and lightweight tank-chassis structure. Furthermore, we successfully pass all qualified brake and rollover stability performance tests on every unit. Moreover, we manufacture from high-strength steel to withstand every road and load condition.
Material and Structural Design
High-Strength Steel
We use special high-strength, fine-grained “ST52” series steel compliant with EN 10028-3. Furthermore, we test and verify the mechanical and metallurgical properties of the steel on every unit. Moreover, we use stress-relieved elliptical dished heads compliant with standards on all tank heads.
Welding and Quality Processes
We conduct manufacturing and quality processes with our expert engineering team under the supervision of an independent audit firm. Furthermore, we carry out all welding with certified welders in compliance with material and standard requirements. Moreover, we inspect and test all welded joints with our internationally certified NDT personnel. Consequently, every joint carries documented quality assurance before dispatch.
Chassis and Equipment
We manufacture the chassis from high-strength steel. Furthermore, we deliver every unit with cold stamping and an approved identity plate. Moreover, we equip the tank interior with bolted drainage rings compliant with standards. Consequently, we provide dual-speed landing legs with 25 tons dynamic and 50 tons static load capacity as standard.
Accessories
- Furthermore, we provide a standard 7-pin 24V system compliant with European norms.
- Moreover, we supply 1 loading/unloading cabinet and 6 DN80 valves as standard.
- In addition, we deliver 6 manhole openings of 500mm diameter and 2 fire extinguisher cabinets.
- Additionally, we include identity plate lighting, signal lamps, and reflective warning reflectors.
- Consequently, water tank, spare tyre basket, ladder, and walkway are all delivered as standard equipment.
Certificates
- Furthermore, we hold ISO 9001:2015 — Harsan Quality Management System Certificate.
- Moreover, we hold ISO 3834-2 — Harsan Welding Quality Requirements Conformity Certificate.
- In addition, we provide EN 10204/3.1 Tank Material Certificate and Leak Test Certificate.
- Consequently, EN 9606-1 Welding Certificate and ISO 14732 Welding Operator Certificate are also delivered with every unit.
Fuel Transport Tanks General Features
| TANK CLASS | CLASS 3 (FUEL) |
| DESIGN STANDARDS | EN 12493 – EN 12252 – TPED – ASME – CODAP |
| TANK CAPACITY | 30,000 LITRES – 80,000 LITRES |
| OPERATING TEMPERATURE | -50°C / +65°C |
| BODY MATERIAL | EN 10028-3 “ST52” SERIES STEEL |
| LANDING LEGS | 25 TONS DYNAMIC – 50 TONS STATIC |
| ELECTRICAL SYSTEM | 24V – 7-PIN |
Fuel Transport Tanks — Frequently Asked Questions
What international standards and certifications do Harsan fuel transport tanks hold?
We manufacture all fuel transport tanks in full compliance with EN 12493, EN 12252, TPED, ASME, and CODAP standards. Furthermore, we hold ISO 9001:2015 Quality Management System and ISO 3834-2 Welding Quality certifications. Moreover, we deliver every unit with EN 10204/3.1 Tank Material Certificate and Leak Test Certificate. Consequently, we fully meet international hazardous goods transport regulations on every unit.
What steel material and welding standards do fuel transport tanks use?
We use special high-strength fine-grained “ST52” series steel compliant with EN 10028-3. Furthermore, we test and verify the mechanical and metallurgical properties of the steel on every unit. Moreover, we carry out all welding with EN 9606-1 and ISO 14732 certified welders. Consequently, our internationally certified NDT personnel inspect all welded joints before dispatch.
What are the capacity and operating temperature specifications of fuel tankers?
We manufacture fuel transport tanks in a capacity range of 30,000 to 80,000 litres. Furthermore, we design every unit in compliance with the Class 3 (Fuel) classification. Moreover, the operating temperature range is –50°C to +65°C for full performance. Consequently, we deliver safe transport for every climate and road condition.
What standard accessories do fuel transport tankers include?
We deliver every tanker with comprehensive standard equipment. Furthermore, we provide a 7-pin 24V electrical system compliant with European norms and 6 DN80 valves. Moreover, we deliver 6 manhole openings of 500mm diameter and 2 fire extinguisher cabinets. Consequently, dual-speed landing legs with 25 tons dynamic and 50 tons static capacity, water tank, spare tyre basket, ladder, and walkway are all included as standard. ISO 9001:2015 and ISO 3834-2 certificates ship with every unit.