LPG Transport Tanks
CHARACTERISTICS OF HARSAN TANKS
• TPED & AD 200 Certification
IV. party is conducted with the supervision of the establishment. Compliance with national and international current legislation and full, safe inspection by an expert team.
• New Generation Design Maximum Load
The latest technology applied aims to ensure that the maximum load is transported in the safest way possible.
• High Strength Special Body Material
Tank body and domes are produced from special hard material for pressure vessels in AD 2000 standards.
• Lamination System
Compared to the standard material used for pressurized road tankers, thanks to the state-of-the-art lamination system, sheet thicknesses have been reduced to a minimum thickness with optimum calculation , and product weight has been lightened.
• Heat Treated Bombs
According to the AD 2000 standards, interior cambers are designed to increase the stability of the vehicle on the road . It is equipped with hard but light single piece high strength carbon steel domes according to standard applications, it creates resistance to vibrations that may occur during the transportation of heavy loads.
• Sun visor
With the sunshade applied on the tank, the temperature affected by the tank surface is reduced.
TANK BODY
• Cylindrical cross section design in accordance with EN 12493 design standard,
• High strength, imported, special “P” series pressure vessel material in EN 10028-3 norm,
• Front and rear 1 outer camber, cross type (T) in the tank conforming to EN 12493 design standard, bolt-connected breakwaters,
• ISO 3834 Welded manufacturing quality competence approved,
• Plates that are bent according to the rolling direction are escaped from T points with robotic welding technology in longitudinal rings and joined by circumferential welding method and a cylindrical body structure conforming to EN 12493 design standard is obtained.
TANK
• Tank Class: Class 2
• Products to be transported: UN 1075 (LPG)
• Operating Temperature: -20C + 50C
• Design Pressure: 17,5 Bar
• Test Pressure: 26,5 Bar
• Certification: AD Merkblatter TUV “Pressure Vessel Certificate”
TANK BODY EQUIPMENT
• Filling / Discharging Line
Filling and discharging with ball valves in the installation cabinet,
• ISO 3834 Welded manufacturing quality qualification approved, welded to patent elbows, discharge pipes extending from foot valves to couplings
• Filling / Discharging Valves
2 ”ball valves at the end of the gas and liquid line in the installation cabinet
• Bottom Valves
Hydraulic valves mounted with bolted connection to nozzles welded to the body base in accordance with EN 12493 standard
• Manhole
Compliant with EN 12493 standard, 1 piece 16 ”in diameter mounted on the body rear dome, bolted connection to the flange connected to the tank body by welding .
• Fixed level gauge placed in accordance with EN 12493 standard pressure calculations,
• Glycerine manometer showing the pressure inside the tank,
• Thermometer that shows the temperature inside the tank
• Rotagage rotary level indicator showing the LPG level in the tank ,
• Safety valve
2 safety valves at the upper part of the tank, which provides the safety of the working pressure, surrounded by a protection pool against possible impacts.
CHASSIS
• Half chassis suitable for body design, with “I” section, produced with robotic welding technology, reinforced with intermediate sleepers, body console connections are bolted to the chassis, flexible against torsion and bending,
• Chassis construction parts are produced with synergic welding machines by certified welders within the scope of ISO 3834 Welded manufacturing quality qualification approval, in perfect harmony .
CHASSIS EQUIPMENTS
• King-Pin : Component type approved in accordance with 94/20 / EC directive, 2 “or 3.5” removable from the bottom,
• Mechanical Legs: Trailer support legs, each with double speed, 25 tons dynamic, 50 tons static , load capacity,
• Axles: 16×2 tons capacity, Reverse Scissor drum brake axle set,
• Tires: 13R x 22.5
• Electrical System: 24 V., 7-pin Ex-Proof electrical system.
PAINT
• Painting with 1 coat of Shop primer,
• Painting with at least 2 coats of epoxy primer,
• Top coat “CABINET PAINT” application with 2 coats of acrylic paint,
• Every point on the body with improved homogeneous distribution of technical equipment and clear paint in gloss surface gloss is provided
OPTIONAL ACCESSORIES
• Magnetic level indicator
• Pneumatic operated internal valves
• Valve cabinet made of rust-free material
• LPG Transfer Pump
• Hydraulic driven pump
• Electric motor pump
• LPG meters ( Digital, Mechanical, Mass meter)
• LPG Hose Drum
• Electric automatic winding
• Pneumatic automatic winding